PAVING ESTIMATE TOOL

Asphalt Calculator

Use this free asphalt calculator to find the asphalt tonnage, cubic yards, and cost for your driveway or paving project. Enter length, width, and compacted thickness for instant results.

Calculate your asphalt

Enter the area that will actually be paved. Your estimate appears as you type.

OPTIONAL

Use the asphalt thickness after compaction. Do not include the gravel base.

A US ton is 2,000 lb. This is a planning estimate, not an installed paving quote.

MORE SPECIFIC ESTIMATES

Explore by project or question.

01 / METHOD

How asphalt tonnage is calculated

The result uses the finished, compacted volume of asphalt. No extra compaction multiplier is added.

  1. 01
    Find the volume

    Cubic feet = length (ft) × width (ft) × thickness (in) ÷ 12

  2. 02
    Estimate weight

    US tons = cubic feet × 148 lb/ft³ ÷ 2,000

  3. 03
    Convert to cubic yards

    Cubic yards = cubic feet ÷ 27

EXAMPLE · 20 FT × 40 FT × 3 IN
800sq ft7.41cu yd14.8US tons

That is 200 cubic feet at 148 lb/ft³.

The Asphalt Institute states that in-place asphalt mix typically ranges from 142 to 148 lb/ft³ and uses 148 lb/ft³ in its tonnage estimate. Actual density varies by mix.

Need the tonnage only? The asphalt tonnage calculator does the same calculation with a mix-type density selector, a waste allowance and per-ton coverage tables.

Comparing material cost by area? See the asphalt price per square foot calculator and thickness chart.

02 / MEASUREMENT

How to measure your paving area

A reliable estimate starts with the paved surface, not the size of the entire lot.

Measure the length and width of the area that will receive asphalt. For a rectangular driveway, enter those measurements in feet and use the finished asphalt thickness from your plan or contractor’s quote.

Measure from one edge of the paved surface to the other, and from the street or curb to where the asphalt ends. Include the apron or widened sections if they will be paved in the same layer.

For an irregular area, divide it into smaller rectangles. Calculate each section separately and add the estimated tons.

If you are paving a driveway, the asphalt driveway calculator lists common sizes — 10 × 20 to 30 × 40 ft — with the tonnage for each.

How to measure a rectangular asphalt driveway Top-down driveway diagram showing a 40-foot length from curb to house and a 20-foot width from paved edge to paved edge. STREET / CURB HOUSE / GARAGE WIDTH · 20 FT LENGTH · 40 FT
Measure the paved surface from edge to edge. This example covers 20 ft × 40 ft, or 800 sq ft.
03 / THICKNESS

Which thickness should you enter?

Enter the finished, compacted thickness from your paving plan or contractor’s quote. Do not include the aggregate base or enter the loose thickness before compaction.

If all you have is a loose depth, multiply it by 0.75–0.85 to get the compacted depth — the tonnage calculator walks through the conversion and shows what entering a loose depth does to the tonnage.

The right thickness depends on the soil, base, expected traffic, and pavement design. This calculator does not prescribe one thickness for every project. If your plan has different asphalt layers or mixes, estimate them separately.

Residential driveways commonly use 2.5–3 in compacted, and 3–4 in where heavy vehicles park. See asphalt driveway thickness by situation and the loose-to-finished-depth conversion.

04 / COST

What does the cost cover?

Enter a local material price per US ton. The calculator multiplies that price by the estimated tonnage to show an asphalt material estimate.

Ask your supplier what the quoted price includes. Labor, removal, base preparation, delivery, and taxes may be quoted separately. Confirm the final quantity and price before ordering.

05 / QUESTIONS

Frequently asked questions.

Quick answers to help you use the estimate with confidence.

How much asphalt do I need?

Enter the length, width, and finished compacted thickness of the area you plan to pave. The calculator estimates the amount in US tons and cubic yards. For an irregular area, calculate smaller rectangular sections and add the results.

How thick should an asphalt driveway be?

Use the finished, compacted thickness in your paving plan or contractor’s quote. Do not include the gravel base. The appropriate thickness depends on the project, so the calculator does not assume one depth for every driveway. For the depth that fits your driveway, see typical asphalt driveway thickness by use.

How many square feet does a ton of asphalt cover?

At 148 lb/ft³, one US ton covers about 81 sq ft at 2 in and 54 sq ft at 3 in. Coverage depends on compacted thickness and density — see the asphalt tonnage calculator for other depths and mix types.

How much does asphalt cost per ton?

There is no single price that applies across the United States. Prices vary by supplier, mix, location, and what the quote includes. Enter a current local material price per US ton to estimate your material cost.

What is hot-mix asphalt?

Hot-mix asphalt (HMA) combines aggregate and asphalt binder. The mix is placed while hot and compacted to the specified finished thickness. This calculator estimates the in-place amount after compaction.

Why might my supplier quote a different number of tons?

The supplier may use a different mix density, site measurement, finished thickness, or ordering allowance. Compare those assumptions with the values used here before ordering.

Can I use this for a curved or irregular driveway?

Yes, as an approximation. Divide the paving area into smaller rectangles, calculate each one, and add the estimated tons.

Does the cost estimate include installation?

No. It multiplies the estimated tonnage by the material price per US ton you enter. It does not calculate a complete installed paving quote.

READY TO PLAN?

Take another look at your numbers.

Change any measurement above and the estimate updates immediately.

Back to calculator