DRIVEWAY ESTIMATOR

Asphalt Driveway Calculator

Estimate the hot-mix tonnage, the number of truckloads and the material cost for a driveway or parking pad. Enter the area you will actually pave and the finished, compacted thickness — the calculator adds a waste allowance and returns the quantity to order.

Calculate your driveway materials

Enter the paved dimensions and finished asphalt depth. Results update as you type.

Length of the paved surface, edge to edge.

Width of the paved surface, curb to garage.

For planning context; choose the depth for your actual project. Patch estimates use hot-mix density, not bagged cold patch.

Enter the depth after compaction — not the loose depth, and not the gravel base.

Crushed stone base, compacted. Shown separately from asphalt tonnage.

Planning density: 100 lb/ft³; confirm with your stone supplier.

For edges, saw cuts and uneven subgrade. Not compaction.

Material only. Cost uses net tons; the order allowance is separate.

01 / METHOD

How many tons does a driveway need?

Three steps, using the compacted volume.

  1. 01
    Area

    sq ft = length (ft) × width (ft)

  2. 02
    Volume

    cubic feet = sq ft × thickness (in) ÷ 12

  3. 03
    Weight

    US tons = cubic feet × 148 lb/ft³ ÷ 2,000

EXAMPLE · 20 FT × 40 FT AT 3 IN
800sq ft200cu ft14.8US tons

200 ÷ 27 = 7.41 cu yd; with 5% allowance, order 15.5 tons.

Contractors in many parts of the US call the same material blacktop — the arithmetic does not change. Measure the surface actually paved, and enter the depth after compaction. The Asphalt Institute uses 148 lb/ft³ in its tonnage estimate; confirm the density of your mix with your plant.

02 / SIZES

Typical driveway sizes and tonnage

Net US tons at 148 lb/ft³ and finished compacted depth. The material-cost column uses an example $150 per US ton at 3 in, before delivery, tax or ordering allowance; the final column includes 5% to order.

Driveway sizeArea2 in3 in4 inMaterial cost at 3 in ($150/ton)Order at 3 in
10 × 20 ft (parking pad)200 sq ft2.5 t3.7 t4.9 t$5553.9 t
12 × 30 ft (single, short)360 sq ft4.4 t6.7 t8.9 t$9997.0 t
20 × 20 ft (single stall)400 sq ft4.9 t7.4 t9.9 t$1,1107.8 t
24 × 24 ft (double, tight)576 sq ft7.1 t10.7 t14.2 t$1,59811.2 t
20 × 40 ft (standard)800 sq ft9.9 t14.8 t19.7 t$2,22015.5 t
30 × 40 ft (large)1,200 sq ft14.8 t22.2 t29.6 t$3,33023.3 t
12 × 400 ft (long rural)4,800 sq ft59.2 t88.8 t118.4 t$13,32093.2 t

A 400 ft driveway at 3 in is about 89 tons net and 93 tons to order — roughly four to five 20–25 ton truckloads.

03 / THICKNESS

How thick should an asphalt driveway be?

SituationTypical compacted thickness
Overlay over sound existing asphalt1.5–2 in
Normal residential driveway2.5–3 in
RVs, trailers, regular heavy vehicles3–4 in
Small commercial or truck turning areas4 in or more

These are planning ranges, not code requirements. Your plan, contractor and local jurisdiction determine the appropriate design for the soil, base and traffic.

Thickness means after compaction. A layer laid 3 in loose may finish at roughly 2.25–2.5 in. For a rough conversion, compacted depth = loose depth × 0.75–0.85. On an 800 sq ft driveway, 3 in loose at a 0.8 conversion is 2.4 in compacted: about 11.8 tons, compared with 14.8 tons at 3 in compacted. Entering loose depth as finished depth overstates that estimate by 25%. Ask whether the quoted depth is before or after compaction.

04 / PROJECTS

New install, overlay or patch

ProjectTypical compacted depthWhat changes
New install2.5–3 in over roughly 4 in compacted crushed stoneBase and subgrade preparation matter as much as asphalt tonnage.
Overlay1.5–2 in over a sound existing surfaceClean or mill, repair failed areas, then tack coat. Minimum charges may apply.
Patch / repairVaries with the repairThe calculator estimates hot mix only. For bagged cold patch, use the product's stated coverage and bag weight.

An overlay can require less material but still incur delivery or short-load charges. Ask the supplier for its minimum order.

05 / DELIVERY & BASE

Truckloads and gravel base

Truckloads

For planning, assume 20–25 US tons of hot mix per dump truck and confirm the actual payload with your plant. The 800 sq ft example at 3 in needs 15.5 tons to order, so it fits in one load under that assumption. At 1,200 sq ft, 23.3 tons to order may fit one 25-ton truck or require two smaller loads. Part loads may carry a fee.

Gravel base

A common planning depth for a new residential driveway is 4 in of compacted crushed stone. Using an approximate planning density of 100 lb/ft³:

base tons = sq ft × base depth (in) ÷ 12 × 100 ÷ 2,000

For 800 sq ft at 4 in, the estimate is 13.3 tons of base stone. Order and price it separately; it is not part of the asphalt tonnage. Confirm density and depth with your stone supplier and contractor.

06 / COST

What asphalt material costs

Material cost = net US tons × your supplier's price per US ton. At 148 lb/ft³, the following amounts are net tons per square foot of paved area.

Compacted thicknessTons per sq ft
2 in0.0123
3 in0.0185
4 in0.0247

At an example supplier price of $100–$200 per US ton, asphalt material runs about $1.23–$4.93 per sq ft at 2–4 in compacted. Published guides put a complete installed driveway at roughly $5–$13 per sq ft, including work beyond the asphalt material; actual bids depend on the base, site and location. See asphalt cost per square foot for the thickness and price assumptions and installed-price sources.

At the same thickness and price per ton, cost per square foot stays the same as the driveway grows; total material cost increases with area. An 800 sq ft driveway at 3 in needs 14.8 net tons, so at a quoted price P per ton its material cost is 14.8 × P, or 0.0185 × P per sq ft. This excludes hauling, short-load charges, removal, base stone, grading, equipment, permits and tax. The calculator uses net tons for material cost; its added ordering allowance changes only the quantity to order.

07 / QUESTIONS

Frequently asked questions

How much does a 20 × 20 ft asphalt driveway cost?

A 20 × 20 ft driveway is 400 sq ft. At 3 in compacted and 148 lb/ft³ it needs 7.4 net US tons, or $1,110 in calculated asphalt material at an example $150 per ton. A complete installed price also includes base, labor, equipment and other site costs.

How much does a 2,000 sq ft asphalt driveway cost?

At 3 in compacted and 148 lb/ft³, a 2,000 sq ft driveway needs 37 net US tons. At an example $150 per ton, calculated asphalt material cost is $5,550, excluding delivery, base, labor, tax and other installation costs.

How much does a 400 ft long asphalt driveway cost?

Assuming a 12 ft width, a 400 ft driveway covers 4,800 sq ft. At 3 in compacted and 148 lb/ft³ it needs 88.8 net US tons. At an example $150 per ton, calculated asphalt material cost is $13,320, before delivery, base, labor and tax. Width and thickness change the estimate.

READY TO PLAN?

Check the depth and area.

Change any input above and the estimate updates immediately.

Back to calculator