Asphalt Tonnage Calculator
Convert the paved area and the finished, compacted depth into US tons of asphalt. Choose a mix type, add an ordering allowance, and see the tonnage you need to buy.
Calculate asphalt tonnage
Enter the area and compacted depth. Your estimate updates as you type.
Your estimate
Based on 148 lb/ft³ in-place density at the compacted thickness you enter. A US ton is 2,000 lb. Planning estimate — confirm quantity and price with your supplier before ordering.
How tonnage is calculated
- 01Find area
sq ft = length (ft) × width (ft)
- 02Find compacted volume
cubic feet = sq ft × thickness (in) ÷ 12
- 03Find net tonnage
US tons = cubic feet × density (lb/ft³) ÷ 2,000
200 ÷ 27 = 7.41 cu yd.
The Asphalt Institute states that in-place asphalt mix typically ranges from 142 to 148 lb/ft³ and uses 148 lb/ft³ in its tonnage estimate. Actual density varies with the mix, aggregate and compaction, which is why this page lets you switch mix type.
Loose depth vs compacted depth
Weight does not change when asphalt is compacted — volume does. One ton of loose mix is still one ton after rolling. What shrinks is the depth: a layer laid at 3 in loose may finish at about 2.25–2.5 in compacted.
- The finished depth is roughly 15–25% thinner than the loose (uncompacted) depth.
- To convert: loose depth × 0.75–0.85 = compacted depth.
- This calculator uses the compacted depth with the selected in-place density, so no extra compaction multiplier is applied.
Why it matters
For 800 sq ft quoted at 3 in loose, using a 148 lb/ft³ in-place density:
- Convert first: 3 in × 0.8 = 2.4 in compacted → 11.8 US tons.
- Entering the loose 3 in directly → 14.8 US tons, about 25% too much.
Ask your contractor: is that thickness before or after compaction?
Two things that are not compaction shrinkage
- Compaction shrinkage changes depth, not weight. Handle it by entering the compacted depth.
- Ordering allowance (5–10%) covers edges, saw cuts, hand work and uneven subgrade — extra material you order and may not place.
Density by mix type
Density moves the tonnage directly: the same 200 cu ft is 14.8 tons at 148 lb/ft³ and 13.6 tons at 136 lb/ft³.
| Mix | Typical density | Use it for |
|---|---|---|
| Hot mix asphalt (dense-graded) | 142–148 lb/ft³ | Default. Driveways, parking lots, overlays |
| Warm mix asphalt | 145–148 lb/ft³ | Similar to hot mix once compacted |
| Open-graded / porous asphalt | 125–140 lb/ft³ | Drainage layers — lighter per cubic foot |
| RAP / asphalt millings (processed) | 120–140 lb/ft³ | Reference only; stockpile weight varies with aggregate and moisture |
| Cold patch (bagged) | Varies by product | Use the manufacturer’s bag weight and yield |
| Crushed stone base (reference) | ~100 lb/ft³ | Not asphalt — shown so base tonnage isn't confused with surface tonnage |
Ranges are planning values. For an order, ask your plant for the mix design density — it's the number that will match the delivery ticket. The selector above includes compacted paving mixes only; RAP and bagged patch need material-specific figures. FHWA RAP unit-weight reference.
Common project sizes
At 148 lb/ft³, using compacted thickness and net tonnage before any ordering allowance.
| Area | Size | 2 in | 3 in | 4 in |
|---|---|---|---|---|
| Parking pad | 10 × 20 ft | 2.5 t | 3.7 t | 4.9 t |
| Single stall | 20 × 20 ft | 4.9 t | 7.4 t | 9.9 t |
| Double driveway | 24 × 24 ft | 7.1 t | 10.7 t | 14.2 t |
| Standard driveway | 20 × 40 ft | 9.9 t | 14.8 t | 19.7 t |
| Large driveway | 30 × 40 ft | 14.8 t | 22.2 t | 29.6 t |
| Small parking lot | 40 × 60 ft | 29.6 t | 44.4 t | 59.2 t |
Add the 5–10% ordering allowance before calling the plant.
How much area one ton covers
At 148 lb/ft³, 1 US ton (2,000 lb) is about 13.5 cubic feet. The depths below are compacted. Coverage is rounded down to whole square feet.
| Compacted depth | Coverage per US ton |
|---|---|
| 1.5 in | ~108 sq ft |
| 2 in | ~81 sq ft |
| 2.5 in | ~64 sq ft |
| 3 in | ~54 sq ft |
| 4 in | ~40 sq ft |
| 6 in | ~27 sq ft |
Read it backwards to check a quote: a 1,200 sq ft driveway at 3 in should need about 22 tons. A quote for 12 tons may indicate a different depth, area or density.
Frequently asked questions
How do you calculate tons of asphalt?
Multiply the paved area in square feet by the compacted depth in inches, divide by 12 to get cubic feet, multiply by the mix density in lb/ft³, then divide by 2,000. For 800 sq ft at 3 in with a 148 lb/ft³ mix: 800 × 3 ÷ 12 = 200 cu ft, × 148 = 29,600 lb, ÷ 2,000 = 14.8 US tons.
How many tons of asphalt do I need for a driveway?
Most residential driveways are 10–24 ft wide and 20–40 ft long at 2–3 in compacted. A 24 × 24 ft double driveway at 3 in is about 10.7 tons; a 20 × 40 ft driveway at 3 in is about 14.8 tons.
How many tons is a cubic yard of asphalt?
At 148 lb/ft³, one cubic yard (27 cu ft) weighs 3,996 lb, or about 2.0 US tons. Loose millings and cold patch vary by material and are not covered by this in-place hot-mix assumption.
How many square feet does a ton of asphalt cover?
About 81 sq ft at 2 in and 54 sq ft at 3 in, at 148 lb/ft³. At 6 in one ton covers only about 27 sq ft.
How much does 1 ton of asphalt cost?
There is no national price — it varies by mix, region, plant, quantity, and whether delivery is included. Enter a local price per ton in the calculator to estimate material cost only. Labour, removal, base preparation and taxes are usually separate.
Does this calculator add a compaction factor?
No. It uses the compacted depth you enter with the selected in-place density, 148 lb/ft³ by default, so compaction is already reflected. The optional waste allowance covers edges and cuts, not compaction.
What about cost?
Enter a price per US ton above to multiply it by the net tonnage. That figure is material only — it does not include labour, removal of the old surface, base preparation, delivery or tax. For a driveway estimate that also shows truckloads and gravel base, use the asphalt driveway calculator.
Double-check your numbers.
Is that depth compacted? Change any input above and the tonnage updates immediately.